Search

7 Jun 2010: Additional details can be found in [6]. In all corrosion tests the pH was continually monitored throughout each test run and was controlled by the partial pressure of the CO2, this ... The test temperature was maintained at 303K (30oC) throughout. In

7 Jun 2010: Transformation of the full ferrite phase provided a good condition for ultrasonic test. ... In addition, short term creep tests at 600oC were performed to meet the requirement.

7 Jun 2010: These calcu-lative values RK are in competition with those from direct experimental tests. ... 1. lower shelf region, where the load-deformation characteristic of test pieces in.

7 Jun 2010: Tensile tests were performed at room temperature. Sample for microstructure investigations were cut and prepared using standard grinding and polishing techniques. ... The deformation strain of 0.4 and strain rate of 5s-1 were kept constant for all tests.

7 Jun 2010: Fig. 5 Fatigue test results. The tests under variable amplitude loading were carried out with a base Gaussian spectrum and a base Gaussian spectrum superimposed with Gaussian distributed overloads, Fig. ... 10. FRACTURE MECHANICAL TESTS For the base

7 Jun 2010: CP). Pipe and cool bending Pipe and hot bendingBurst test pipes (110 m). ... has been used to perform the first long term full scale test in environment.

7 Jun 2010: Table 6 Galvanised Wire Properties. Coil No. No of Tests, n UTS, MPa. ... To test this assumption two full- scale fatigue tests were completed utilising two different mean load conditions (20% & 30% of the cable MBL) with a fluctuating load of /-10% MBL.

7 Jun 2010: constituents. The tests used an atmosphere of 15 vol % CO2 10 vol % H2O 1 vol % SO2 with balance N2 , and the test specimens were coated with a synthetic coal ash, K2SO4 ... A large creep test matrix is presently underway covering two major test

7 Jun 2010: Toughness can be synthesized in two broad categories, a) fracture initiation, as indicated by the Charpy test, and b) propagation of cracks, as indicated by the KIC type testing, also in ... Stainless-steel rebar is far superior to conventional rebar,

7 Jun 2010: b) joint: E911, pipe-Øa: 336 mm, wall thickness: 62 mm. Test temp. ... b) joint: P92, pipe-Øa: 300 mm, wall thickness: 40 mm. Test temp.