Search

7 Jun 2010: These weld metals have hadlimited use, primarily owing to economic factors and lackof flexibility. ... 1998–1999. 15. ‘Charpy impact test on metallic materials; part 1: test method’,.

7 Jun 2010: Small-scale tensile tests, ring expansion test, and hydrostatic burst test were conducted to ensure the tensile properties of high strength line pipe steel against internal pressure. ... 2-2. Welded joint tensile test results. Welded joint tensile tests

14 Jun 2013: Defects such asA-segregates are still commonplace, and components are regularly scrapped due to their presence, lead-ing to increased economic and environmental costs.

7 Jun 2010: Table 2 Mechanical properties with different process Tensile Test Impact Test Bending. ... Fig 1 shows some application cases. 2.3 ECONOMIC EFFECTS Table 3 shows the material saving results of one high strength steel substituted the other lower strength

7 Jun 2010: The delivery conditions in EN 10149 do not include a mandatory test of impact energy. ... Test specimen “O“. Test specimen “S“. Fig.10. Structural detailing and large scale specimens.

7 Jun 2010: Specimen 3 - Experimental Test. Maximum or Limit Bending Moment. c) Bending moment – curvature relationship. ... et al. (2005): “HOTPIPE JI PROJECT- Experimental Test and FE Analyses”, OMAE Paper No.

7 Jun 2010: Additional details can be found in [6]. In all corrosion tests the pH was continually monitored throughout each test run and was controlled by the partial pressure of the CO2, this ... The test temperature was maintained at 303K (30oC) throughout. In

7 Jun 2010: Transformation of the full ferrite phase provided a good condition for ultrasonic test. ... In addition, short term creep tests at 600oC were performed to meet the requirement.

7 Jun 2010: type test). Overall. pressure. ratio. 1970s. 1980s. 1990s. 2000. Cruise SFC v OPR & TET. ... T890. T895. T772. 1975. 2000. 1300. 1600. Type test temperatures of RB211 & Trent HP turbine blades.

7 Jun 2010: Tensile tests were performed at room temperature. Sample for microstructure investigations were cut and prepared using standard grinding and polishing techniques. ... The deformation strain of 0.4 and strain rate of 5s-1 were kept constant for all tests.