Search

26 Mar 2010: A test plan of all creep tests carried out is given in Table 1. ... Some creep tests, for example test CCTK-70-01 (Fig. 6), had to be discarded, because slip events were observed.

22 Mar 2010: The decision to make the bridge continuous was a late amendment to the design, and apparently taken on economic grounds since it allowed the new cables to pass from one

22 Mar 2010: lowest upper bound. He has conducted many tests to. show that, despite being an upper bound, his predic-. ... material tests were used. The program converged very slowly to a solution,.

26 Mar 2010: Tests had to be carried out at various temperatures levels and for that reason the test apparatus included a Thermo center oven (Fig. ... 160oC. Each test was repeated three times, giving a total of 72 tests.

27 Mar 2010: Therefore long-term creep of ropes is a subject of interest. However, few long-term creep tests have been performed in literature, as this kind of test is costly. ... temperature (the initial strain value is determined by performing tensile tests for

30 Mar 2010: 16]. Kevlar 49 and Technora yarns, available in reel forms, were used for all tests. ... Stress-limits proposed by various researchers. CREEP TESTS ON ARAMID FIBRES. RESULTS AND DISCUSSION.

22 Mar 2010: Test procedures. Yarns tested. All the tests described here were carried out on 1000 fila-. ... test results to be compared. A preliminary series of tests was performed on a tensile.

26 Mar 2010: Test beam inside scanner. • Test frame must be non-magnetic. • ... RF probe. Loading jacks. Reaction frame. Watertank. Beam. Forming composite structure image Test procedure• Water tank filled• Beam loaded by external hydraulic.

26 Mar 2010: The reinforcement used in the cylinder tests was made from Kevlar 49 aramid yarns [15]. ... The test frame was made from nylon bars and polycarbonate sheet, with twisted aramid yarns as the tension elements.

22 Mar 2010: the question remains about repeatability. To test this, tests. Table 4 Creep gradient values at each temperature step of SIM70-01-01. ... times of SIM tests at 70 and 50% ABL, respectively. Figure 21 shows stress-rupture test data obtained from.