Search

16 Apr 2002: Eight tests were carried out on laterally spreading slopes and a further five on slopes containing instrumented pile foundations. ... Using linearised pore pressures overestimated the measured slope displacements as dilation limits the movements measured

7 Mar 2002: Environmental Geotechnics. 29. M.C Barbosa, R J Lynch,. and J.D McKinley, "Migration of aqueous acetone and potassium chloride through kaolin: minidrum centrifuge test CBLC1", Cambridge University Engineering Department Technical ... imaging techniques

11 Dec 2002: During loading, tests conducted at different rates showed no influence on the strain developed. ... In unloading, the slower rate tests produced greater shear strains once the condition became extensive.

14 Mar 2002: A discrete element package PFC3D is then used to model individual particles in simple crushing tests.

16 Apr 2002: effects. A series of centrifuge tests involving loose and dense, dry and saturated models of homogeneous horizontal sand layers has been carried out to investigate the effects of the end-walls

21 Jan 2002: A summary of allthe test results and analytical predictions is given in Table 1. ... The test results for the overall stiffness of thehinge in each component direction can be seen in Figure 7.

27 Aug 2002: 2.5. 3. 3.5. 4. 4.5. FE simulation. Displacement (mm). For. ce (. N). Test 1. Test 2. Figure 8: Comparison of two tests on Config-uration A dish with ... Test 2. Figure 9: Comparison of two tests on Config-uration B dish with FE analysis.

18 Feb 2002: Theexperimental results presented in this reference are avery valuable benchmark against which to test new so-lutions. ... Comparison with Sewall’s Experiment. The third test case was based on one of the tests re-ported in Ref.

17 Oct 2002: in a style suited to the analysis of geotechnical tests. This technical report explains. ... accurate and precise deformation data from a geotechnical test. As noted earlier, the.

9 Sep 2002: Enlightened modellers may seek to cross-correlate modelling parame-ters with index test values in order to maximise the use of this plentiful empirical information. ... This is not the case, however. Two factors of uncertain origin emerge from test data.