Search

21 Feb 2019: 6.5 mm x 6.5 mm. 2.1.2 Test Procedure. Mechanical tests were conducted using a screw-driven test machine, as follows. ... i) Uniaxial tension tests on dogbone specimens of SMP adhesive were performed in.

10 Aug 2009: 3.1. Uniaxial tests on face-sheet materials. The tests on the composite face-sheets were conducted in a screw-driven test machine at a nominal appliedstrain rate of 103 s1. ... The axial strainin both the compression and tension tests was measured by

11 Mar 2013: the slow tests of Wang et al. (2005b) will be analysed; here, the test time. ... failure locus applies to test data on AISI 4135 steel, but now for rapid tests in.

29 May 2013: UHMWPE laminates. The tensile tests were conducted in a screw-driven test. ... analogous manner to the static stretch-bend tests reported above. 4.1 Dynamic test protocol.

31 Aug 2010: ratios. 2 Penetration tests using a solid punch. 2.1 Test method. ... and leakage of the internal lipid fluid. 4 Injection tests. 4.1 Test methods.

7 Jul 2004: Its originality lies in two main points: firstly,. we use original test conditions. ... tests (e.g. test no. 1 for dry sugar at _ea 0:16%/s).In order to overcome this difficulty and accurately.

7 Jul 2005: The pro7les at selected stages ofdeformation are shown by photographs taken from multiple interrupted tests. ... Compression tests on panels. Measured collapse response of egg-box panels at low velocity.

26 Apr 2016: element model in a subsequent publication [1]. 2. Test Method. 2.1 Specimen manufacture. ... direct compression, in-plane shear, and combined tension and shear2. Additionally, interrupted tests.

10 Sep 2006: Fig. 4 Sketches of tests used to measure the toughness of asolid, „a… the trouser tear test and „b… the scissor tear test. ... 5 mm in diam-eter at a similar speed to the human skin penetration tests.

2 Nov 2006: The. discharge characteristics of the liquid jet were measured using a custom-built test instrument. ... Yeoh, 1987)suggest that the measured toughness JIC is sensitive tothe type of test performed.

4 Aug 2005: Three types of numerical test were performed: (1) patch tests for a 2-D mesh of elements underuniform loading; (2) 1-D boundary layer analysis and (3) 2-D stress analysis ... Patch test. All types of element were subjected to patch tests as shown in

14 Aug 2023: In such. indentation tests, an indentation tip is lowered onto the surface of the test specimen and. ... modulus and hardness obtained from indentation tests are plotted against the size of the.

27 Dec 2017:  .     . out-of-plane, longitudinal shear test. ... on the load-displacement response. Specifically, repeat tests were performed on specimens of.

4 Sep 2018: in the electrochemical tests, which show that after bending, only the electrodes with 20 wt% of. ... same bending cycles. Further, mechanical tests show the CNT based films can have Young’s.

7 Jul 2005: 2.6%, 6.6%, and 13.3%, were used. 1 Tension, compression, and shear tests were performed on foamsamples of all three densities using a screw-driven Instron 5500R test machine. ... Compression tests using a Celanese test rig were conducted on three

29 Oct 2018: Additional details of helium pycnometry. are given in Appendix A. Uniaxial tensile tests were performed using a screw-driven test machine, with the loading direction inclined. ... In-situ. tensile tests were conducted with a micro-test stage equipped

24 Apr 2006: Test material and experimental procedure. A series of shear collapse experiments has beenconducted on conical frusta. ... Introduction. Shear collapse experiments. Test material and experimental procedure. Measured collapse response in shear.

27 Jul 2009: These experiments are now reported. 3 Experimental InvestigationA series of compressive tests was performed on square honey-. ... 3c. A series of compression tests was performed on the macro-scopic sandwich panels.

29 Jan 2014: initial peak load measured in the drop-weight tests exceed those measured under. ... Y-frame sandwich beam in the drop-weight tests. The photographs show the.

17 Jun 2005: s̄= 0.034 and ā = 0.1. Test geometries are marked on the map. ... Tensile specimens of dog-bone geometry were cut fromaluminium face sheets. The tensile tests were performed in ahydraulic test machine at a strain rate of 10-4 / s; the axial swas