Search

20 Jun 2005: 3.3.1. Compression tests. Compression experiments were conducted in a screw driven test machine with load measuredvia the load cell of the test machine and compressive strain deduced by measuring ... Next, conicalindentation tests in the axial direction,

29 Oct 2018: was smoothed with a flat-edged PTFE strip. Test Procedure. The majority of mechanical tests were conducted using a screw-driven test machine2. ... Test Geometry t, h K Tnc, Tsc Γn, Γs δnc/t, δsc/s.

29 Jun 2018: PMMA in terms of the underlying molecular deformation processes. Tensile tests on a. ... number of fitting constants and there are few non-proportional, multi-axial tests available to.

4 Sep 2018: test machine). Tests on double-cantilever beam (DCB) specimens were conducted using a. ... To. test this hypothesis, additional tests were performed by varying D but layer thickness held.

8 Nov 2004: 8 5 1. 4. Measurement protocol. Compression tests were performed in the out-of-plane, 3-direction, of the woven core sandwich plates, as sketchedA screw-driven test machine was used ... core. The applied load was measured using thecell of the test machine

6 Jul 2005: Geometry of braided tubes used for tensile tests. Helix angle Wall thicknesst Diameter 2r Gauge length̀. ... Repeat tests show that the scatter in strength from test to test is small; for example,repeat tests forθ0 = 55 are included infigure 3b.

29 Apr 2022: critical tests. These tests include starving the specimen of oxygen, varying the aqueous. ... of a thin coating. Destructive mechanical tests on double-cantilever beams, butt joints.

7 Jul 2004: Compressive tests were. Table. 1.Dim. ensionsofspecim. ensforeach. typeoftest,alongwiththeloadandshapefactors. fortheshapee. ciency. mapgiven. ... Independent uniaxial tests on the glass/epoxybraids show that they behave in an elasticplastic.

29 Aug 2012: uniaxial tensile and compressive responses of the nano-. crystalline composites. Compression tests were performed. ... Instrumented nanoindentation. Observation of shear bands in uniaxial tests. Observation of shear bands.

20 Jul 2007: Additional longitu-dinal shear tests were performed on the corrugated core specimens; it sufficed to test narrow specimenscomprising three corrugations in the 1–3 plane such that L = 6H, and a ... Standard test method for shear properties of sandwich

7 Jul 2004: inter-connected. 2. TEST METHOD. A high pressure triaxial system was used for com-. ... In each of the tests conducted. in the present study, it was ensured that the test.

28 Jan 2014: tests, such as the cantilever beam test, are an important first step in the measurement. ... Tests were conducted in a screw-driven test machine by gripping the ends of the.

5 May 2015: 2.2 Knots tests A knot test as proposed by Jones & Johnson (1971) was also performed in order to obtain an independent estimate of the compressive strength. ... A1a. The tensile tests were conducted in a screw driven test machine at a nominal applied

29 Oct 2018: 4c are of the order of magnitude as those in quasi-static tests. ... strength steel during slow strain rate test. Corros. Sci., 2007. 49(11), p.

7 Jul 2004: Cunningham [15] and Banhart [16].Preliminary tests (for data see Ref. [17]) have. ... The magnitude of back. face strain in these fracture tests conrm that the.

10 Sep 2006: Conventional mechanical test machines are used to perform uniaxial tensile andcompressive stress versus strain tests at low to medium strain rates (103–101 s1). ... Appendix A. Force equilibrium in the split-Hopkinson pressure bar tests. The force

13 Dec 2005: a) Resultf the same tests shown on linear axes. s for the entire test duration, shown on log-linear axes. ... Images of eachspecimen taken at test completion, using the video imagingsystem, are shown inFig.

7 Jul 2004: Tests at thestrain rates in the range 103}100 s1 were performed using a servo-hydraulic test machine, whiletests at strain rates in the range 1000}5000 s1 were performed using ... Tests at e5 "103}100 s1 were performedusing a servo-hydraulic test machine,

22 Aug 2017: characteristics from EP test data. In the current study, we present the analysis of TDS tests. ... the underlying principle behind the TDS test. Recall that, in TDS tests, the temperature T at.

4 Oct 2008: First, we describe the procedure used to manufacturestainless steel square honeycomb and our test protocol. ... The shear tests were performed on a 150 kN screw driven test machine at an applied macroscopicnominal shear strain-rate of 104 s1.