Search

11 Aug 2003:

27 Jun 2008: Centrifuge tests, simulating the one-dimensional consolidation of, and contaminant migration from, a mineral waste site were conducted and a two dimensional finite element program has been developed to simulate the

26 Mar 2010: 5 COMPARISONS WITH TESTS: PLATE END DEBONDING 5.1 Plate end interface crack induced debonding. ... The analysis of other test data also shows similar results validating the present analysis [4].

8 Apr 2011: Tests had to be carried out at various temperatures levels and for that reason the test apparatus included a Thermo center - Salvis Lab oven, as shown in Fig. ... The variation of the test data at all load levels about this line is small, indicating the

10 Nov 2003: correlation with the new experimental results as well as data from 90 push tests conducted elsewhere. ... Two specific longitudinal splitting modes were experienced in the new tests, which were strongly influenced by the arrangement of the stud connectors

18 May 2005: and specific in situ test results. This thesis identifies and, where possible quantifies, the.

22 Feb 2011: Buildings for the earthquake test. Collapse. Files to download:-.

19 Feb 2008: K. and Pellegrino, S. (1991). The Pantographic Deployable Mast: design, structural performance and deployment tests.

11 Jul 2006: This is achieved by conducting a series of unconfined compression tests in wet-soil mixed specimens prepared both mechanically and using a laboratory-scale auger-mixing equipment.

26 Mar 2010: A test plan of all creep tests carried out is given in Table 1. ... Some creep tests, for example test CCTK-70-01 (Fig. 6), had to be discarded, because slip events were observed.

29 Aug 2001: from shearvane tests, Hamilton et al (19!31). Assuming identical vertical stresses, overconsolidation. ... of the centrifuge test the fingers came cut of contact with the tower. -.

10 Nov 2003: Preliminary development work was required to determine a means of pre-tensioning the FRP tendons and to elucidate the parameters to be used in the design of the main experimental test ... In the main test series pre-tensioned concrete beams were cast

26 Mar 2010: Tests had to be carried out at various temperatures levels and for that reason the test apparatus included a Thermo center oven (Fig. ... 160oC. Each test was repeated three times, giving a total of 72 tests.

27 Mar 2010: Therefore long-term creep of ropes is a subject of interest. However, few long-term creep tests have been performed in literature, as this kind of test is costly. ... temperature (the initial strain value is determined by performing tensile tests for

9 Mar 2012: the centrifuge tests. The Depth Averaged Material Point Method (DAMPM) is used in. ... conditions given in the centrifuge tests. Both the results from the centrifuge tests and.

22 Mar 2010: Test procedures. Yarns tested. All the tests described here were carried out on 1000 fila-. ... test results to be compared. A preliminary series of tests was performed on a tensile.

8 Apr 2011: Double-shear pull tests and single-shear pull tests have been the most popular test methods, as a result of their simplicity (Chen et al., 2001). ... Figure 2 — Direct pull out tests set-ups. (a) Beam test (b) Modified beam test.

20 Dec 2001: The test was continued until snapping of the spiral occurred. For circular concrete specimens with a single spiral, tests were made at 8 days, 15 days and 28 days to obtain ... CONCLUSIONS Concentric compression tests on short AFRP spirally-confined

30 Mar 2010: 16]. Kevlar 49 and Technora yarns, available in reel forms, were used for all tests. ... Stress-limits proposed by various researchers. CREEP TESTS ON ARAMID FIBRES. RESULTS AND DISCUSSION.

10 Sep 2008: In addition to the tests carried out in this pro-. gramme, additional test data was available from ICI. ... and additional weight was given to the control tests, for. which more test data was available.