Search

24 Nov 2006: Theseevices were fabricated by a four-mask process, and electrical tests have confirmed the stepwise increase of the capacitance with bias. ... A four-maskrocess was developed to fabricate these capacitors, and electri-al tests were performed on these

Micro-hardness tests on annealed and work-hardened copper polycrystals. Scripta Met. et Mat.,34(4), pp 559-564, 1996.

6 Jul 2005: Yet current internationalstandards on indentation tests are based on empirical correlations, with little inputfrom analytical and numerical solutions. ... In practical indentation tests it is difficult to control the degree of friction betweenindenter

24 Jul 2006: The multiple data points at each m valuecorrespond to tests with different velocities vo, see figure 6. ... It comprises a water tube with a piston at one end and a test structure atthe opposite end.

7 Jan 2019: We note thatthere is no straightforward relationship between K0, KSS and the crack ini-tiation toughness KIc as defined in the standard test methods for fracture. ... 17] ASTM E 1820-01, Standard Test Method for Measurement of FractureToughness.

3 Oct 2020: approximately 3 nm. A combination of indentation tests and multi-scale finite element. ... cycles were performed per test. Each loading and unloading segment were of 2s.

1 Jul 2005: compression tests. In order to present their results, we introduce the strength enhancement. ... impact velocity and initial momentum. The plates were examined after each test to.

3 Aug 2012: The compression tests were also performed inhe screw-driven test machine, with the loads and strain measuredn a similar manner to that described for the tensile tests. ... Measurement of Bend ResponseThe bend tests on the clamped and simply supported

8 Aug 2016: Berkovich nano indentation tests on 4 Ni double gyroid films were performed using. ... Approximately six separate indentation tests were conducted on each of the 4 gyroid.

25 Oct 2010: In Section 3 the dynamic test procedure is outlined, and inSection 4 experimental results are reported. ... In order to validate the experimental procedure for measuring It,a test case was performed.

14 Aug 2023: displacement response from the test given in Figure 1(d). The. load and displacement both increase until intergranular. ... cohesive strength in tension, whereas the maximum load. measured by the cono-spherical tip indentation tests depends.

13 Aug 2004: Tests are performed using 304 stainlesssteel. The outline of the paper is as follows. ... A few tests were performed with speci-mens comprising 12 12 cells to examine edge effects.

8 Aug 2009: to monolithic beams of equalareal mass; in these tests, the prismatic axis of the cores wasaligned with the longitudinal axis of the beams. ... Protocol for the dynamic tests. Experimental results. Effect of projectile momentum upon the deformation of

10 Aug 2009: measurements of the applied load from the load cell of the test machine. ... 2.4. Dynamic test protocol. The dynamic out-of-plane compressive responses of the corrugated and Y-frame cores were measured viadirect impact tests in which the forces were

7 Nov 2008: Tagarielli et al. ([18],[20]). Uniaxial compression and single-lap shear tests were. ... an initial deflection of 0.02W  upon tightening of the test fixture.

13 Apr 2006: Consequently, the tests do not lie in the impulsive regime, and projectile momentum alone isinsufficient to quantify the level of loading. 2005 Published by Elsevier SAS. ... The core compressive strain εc c/c in the quasi-static tests is plotted in

7 Nov 2006: The screened subset ofprocesses are then ranked, using approximate economic criteria,the most obvious of which is time. ... The ability to manu-. facture to tolerances controls the precision and accuracy of the de-vices and also has economic consequences

25 Mar 2009: 10. of the three-point bend test, including span S , height H and crack depth ratio a B. ... This conclu-sion is inconsistent with the definition of fracture toughness – a material property independent of test geometry.

10 Aug 2009: a metal film and its micro-structure, especially when the beam-bending test is used. ... The high resistivity is obtained from microfabricated test struc-tures with a thickness of 0.4–0.7 m.

29 Jan 2014: Dry sand tests are prepared as follows. The circular sand tray is loosly filled with sand (Fig. ... having the effect of averaging out small spatial variations in sand flow from test to test.