Search

29 Mar 2004: The tests were done with a cross-head speed of5 mm/min, and were recorded with a Sony DCR-PC110E digital video camera. ... Displacement (mm). Fo. rce. (N. ). Test. Abaqus. 6. Fig. 17 Response to vertical tip loads.

10 Jan 2004: differences. A series of test cases are presented, whose results agree with previously. ... plates. An initial example is investigated to test the optimization code, written in Matlab.

12 Jul 2002: To cross-head. To baseof Instron. Figure 5.2: Kxx test set-up. Prediction of Rolamite Stiffness. ... ess. N/m. m2. E=13200. Figure 5.10: Stiffness test on coated wire used in hinge.

17 May 2005: Packaging. Displacement controlled static packaging tests werecarried out vertically in an INSTRON testing machine. ... Fig. 14 Localization of deformation in the verticalpackaging test. The finite element simulation results for Config VIII–

17 Apr 2007: A n m. 1.82 104 1.63 -0.925. 3.2 Shear Test Data Option. ... Another possibility is to use the viscoelastic command in conjunctionwith shear test data, in order to generate a viscoelastic model based onexperimental data from either creep or relaxation

10 Apr 2007: In the case of a uniaxial test in the machine direction the effective stress reduces to σ̄ef f = σ1.Similarly A22 can be found from uniaxial tests in the transverse direction. ... 1Cathey, H.M. Test flights of the NASA ultra-long duration balloon.

17 Feb 2004: contour plot. Figure 18 shows this plot for experimental test case 3, where the. ... Test case 1/κ2x 1/κ3x 1/κ5y 1/κ3x′. (mm) (mm) (mm) (mm). 1Test.

21 Mar 2001: 5 Packaging and Deployment Tests 345.1 Zig-Zag Folding. 365.2 Wrapping. 375.3 Folding Machine. ... Figure 4.7: Hub connection between hub and membrane. Chapter 5. Packaging and Deployment Tests.

27 Jun 2008: Centrifuge tests, simulating the one-dimensional consolidation of, and contaminant migration from, a mineral waste site were conducted and a two dimensional finite element program has been developed to simulate the

14 Feb 2003: Twotypes of vibration tests were carried out: (i) a linearidentification test using slow sine sweep and constantsine excitation, and (ii) a nonlinear identification testusing slow sine sweep excitation. ... A Polytec PSV300scanning laser vibrometer was

21 Mar 2001: 293.10 Unstressed rib shape. 31. 4.1 Schematic top view of test article. ... 404.9 Schematic layout of tension test on membrane strip. 434.10 Tension tests on membrane strips.

27 Mar 2000: At the time of writing, tests havebeen carried out only on a 1 mmthick dish with a skirt 43 mm wide, loaded at 90 from the cuts. ... Thescatter in the displacements measured belowP = 8 N suggests that —despite the use of steelguides— there is still

22 Mar 2002: thickness of the membrane. Values between 1% and100% of the thickness have been used, considering dif-ferent imperfection magnitudes to test the sensitivityof the predicted response. ... Note that all of these modes closely resemble theexpected wrinkled

5 Jul 2001: Extensional Stiffness of Tape-Spring. Dead band caused by play in test set-up – now fixed although no results. ... Redesign of hinge based on data. New automated set-up to be used to obtain peak moment and test hinges of different sizes.

23 Feb 2006: All test results presented in this section were obtained on 380 mm widemembranes with a height, between the supports, of 128 mm. ... Laser scanning frame. 3.2. Shear test apparatus. 3.3. Square membrane apparatus.

9 Apr 2004: Yee and Pellegrino [3] have shown that these lami-nates are able to survive larger bending strains thanthe ultimate failure strains that are measured fromstandard coupon tests in pure tension or ... The most direct approach is to model these lami-nates

12 Nov 2003: These systems can host test structures ofalmost unlimited size even when motion exists. ... disadvantage.However, the range of possible dimensions of test articles is almost unlimited.

14 May 2002: This test confirmed a conclusion already reached bySeffen et al. (2000), that an advantage of this packagingscheme is that the membrane provides a useful couplingbetween the motion of the ribs.

8 Feb 2000: validated against experimental data from a ten-sion test and a bending test on flat plates. ... b)(a). Figure 6: Tension and bending tests on composite plates. The tension test, Fig.

25 Sep 2000: 5.1 Introduction. 43. 5.2 Experimental Set-up. 45. 5.2.1 Test Specimen. 45. ... 40. 5.1 Membrane test model. 46. 5.2 Schematic diagram of experimental set-up for impulse excitation.