Search

7 Jun 2010: Tests were carried out in accordance with JIS Z 3158 [7]; 60mm anchorage welds were made at either end of the 80mm test section using a GMAW procedure with AWS ER ... For the wide plate tests the stresses were estimated from the test records as force

7 Jun 2010: 8.5.1 Chromium8.5.2 Silicon8.5.3 Test temperature8.5.4 Heat treatment temperature8.5.5 Boron8.5.6 Non-linear effects8.5.7 Software. ... 9.4 Test Simulations9.4.1 Just a random search?9.4.2 Generations9.4.3 Populations9.4.4 Crossover rate9.4.5 Mutations9.4

7 Jun 2010: Specimens for torsion tests, 10 mm in diameter with a gauge length of 15 mm, were machined from the ingots. ... CONCLUSION The hot workability of three different ingots of P91 steel was investigated by means of monotonic torsion tests.

7 Jun 2010: Tensile test were performed at room temperature. Deformation rate was 0.5mm/mn. ... No tensile tests were performed on hot-torsion samples, PER4, due to its inhomogeneous microstructure through thickness.

7 Jun 2010: Laboratory hot rolling with coiling cycle were carried out to test the effect of reduction of carbon content on the microstructure. ... Fig. 10 showed the Charpy impact test results by v-notched full size specimen.

7 Jun 2010: Slow speed tensile tests were made (0.8 mm/min) 1 hour and 1 week after pickling. ... Thickness. mm. Test type Method / arc energy. kJ/mm. ReH/p0.2. N/mm2.

7 Jun 2010: Figure 7. Some results of crossweld creep tests on a SA weld in P23. ... The total test duration was 4.000h with intervals after 500,1.000 and 2.000h.

7 Jun 2010: After austenitisation (900 C for 600 s), the following dilatometric tests have been carried out:. ... 11) constituted of 96%-92% ferrite and 4%-8% MA, confirming the results obtained with the dilatometric tests.

7 Jun 2010: Compact tension shear (CTS) specimens were used for tests under mixed mode III loading condition. ... 2) Average value of 16 tests under compressive residual stress: Kth = 16.9 MPam1/2.

7 Jun 2010: Charpy impact tests were performed from high temperature to low temperature to obtain full impact curve. ... Fig. 6 Charpy impact test results on the simulated weld bond of Al-Si weathering steels.

7 Jun 2010: Phase III (by 2025). • Economic Contribution. • Better Quality of Life. •

7 Jun 2010: PurposeProvides the short-term (yield and ultimate tensile strength) mechanical properties data on austenitic stainless steelat different test temperatures and heat treatment temperatures. ... STMECH_AUS_SS.xls - a Microsoft Excel file containing the data

7 Jun 2010: The ageing tests were performed using a laboratory furnace with a maximum temperature deviation of 4 C. ... Figure 5 Figure 6. 5. CREEP BEHAVIOUR A wide creep test program was carried out on pipes and tubes of both Grades 91 and 911: isostress and

7 Jun 2010: Standard tensile and Charpy V–notch tests using 10 10 50 mm samples were conducted onthe as–rolled steel. ... Table 3: Charpy impact test data from the hot–rolled plates, for V–notched 10 10 mm cross–sectioned specimens.

7 Jun 2010: 3). All braze welding tests were performed automatically on a machine or a robot. ... Values reported in the table are average values of the three tests realized.

7 Jun 2010: EN 10028-4. X7Ni9. <,10. <30 >30<50. QT 680. Tensile Test. >18. ... Results from drop weight tests with Pellini specimen exist for Ni-alloyed structuralsteels.

7 Jun 2010: easily. Tests using pure sliding, cooled, pin–ring tests have demonstrated that low–carbon. ... comparative tests against bainitic steels, Railway Gazette International 855–857.Heller, W. and Schweitzer, R.

7 Jun 2010: The advantages of such an action however are to be seen presently not only under the pure economic profile, but, in many sectors, like transports, also under much more important

7 Jun 2010: Then, in the last stage of the tests, the samples were cooled down to room temperature at 5C/sec. ... reaction. In spite of that, it was possible to keep a constant cooling rate of 5C/sec in this test.

7 Jun 2010: 0.02. 0.35. Internal Pressure Test? (0/1). 0. 1. Cu. 0. 3. ... Test Temperature (oC). 600. 700. Ni. 0.06. 0.35. Test Duration (h).