Search

7 Jun 2010: b) joint: E911, pipe-Øa: 336 mm, wall thickness: 62 mm. Test temp. ... b) joint: P92, pipe-Øa: 300 mm, wall thickness: 40 mm. Test temp.

7 Jun 2010: Toughness can be synthesized in two broad categories, a) fracture initiation, as indicated by the Charpy test, and b) propagation of cracks, as indicated by the KIC type testing, also in ... Stainless-steel rebar is far superior to conventional rebar,

7 Jun 2010: The effect can also be demon-strated in corrosion tests with increased resistance to corrosion for the same layer thickness. ... pre-treatment, KT-varnishing, corrosion-testing after stone-blasting (VDA 621 - 415) b) Abrasion by mechanical deformation in

7 Jun 2010: To examine the deformed structures of austenite at various strain levels, compression tests were conducted with hot deformation simulator. ... On the other hand, considerable portion of the examined area with TEM is covered by dislocation cell structures

7 Jun 2010: A grain boundary can be observed vertically in the middle of the image. ... Abe, JSME Int. J., A48, (2005),. accepted. 12) Japanese Industrial Standard, “Test Pieces for Tensile Test for Metallic Materials: JIS Z 2201”,.

7 Jun 2010: Stainless steel can thus have economic benefits over competing materials. Offering weight savings, enhanced “crashworthiness” and corrosion resistance, it can also be recycled. ... Tests were performed at alternate stresses, reproducing those

7 Jun 2010: Uni-axial buckling test on the pipes developed were carried out. Those tests revealed that the pipes have 1.5 to 2 times larger the buckling strains compared with those of ... Higher resistance to buckling of developed pipes was verified by full scale uni

7 Jun 2010: KEYWORDS Maraging, Intergranular Failure, High Strength, Grain Boundary, Precipitation INTRODUCTION Fe-Ni-Mn maraging alloys have attracted increasing interest because of their economic aspects. ... Tensile properties were measured using Instron type

7 Jun 2010: GTA welding by the Varestraint test. Estimation of BTR in laser surface melted region. ... a triple-bead longitudinal Varestraint test. You can see many cracks in original.

7 Jun 2010: Gelinck, E. van der Heide, M. de Rooij, D. Schipper A comparison of yield loci measured with mechanical tests and calculated from crystal plasticity for steel sheets Y.G. ... MODELING. Towards economic design of a pressure vessel made of duplex stainless

7 Jun 2010: Results of steam oxidation tests at 650C (1200F) for times up to 2000 h have been reported for several austenitic steels[24]. ... BLOUGH ET AL, “Superheater Corrosion – Field Test Results”, Report TR-103438, EPRI, Palo Alto, (Nov 1993).

7 Jun 2010: To understand the relationship between the developed microstructure and the mechanical properties, it is more convenient to combine the tests and relate the mechanical properties to the microstructure. ... Funding was provided by the German Federal

7 Jun 2010: Toughness within the field of welding is generally expressed as impact toughness since in the majority of circumstances it is measured using a Charpy impact notch test. ... These are then tested in either quality or safety tests before use.