Search

7 Jun 2010: Small-scale tensile tests, ring expansion test, and hydrostatic burst test were conducted to ensure the tensile properties of high strength line pipe steel against internal pressure. ... 2-2. Welded joint tensile test results. Welded joint tensile tests

7 Jun 2010: The amount of hydrogen in the test materials was measured after the tests from pieces cut out from the gauge section. ... Furthermore two test series of fracture mechanics tests were performed using fatigue pre-cracked C(T)25 specimens at MPA Stuttgart.

7 Jun 2010: to a road test, it was necessary to build a drivable experimental spaceframe for systematic tests using thermal joining (welding). ... Performance of preliminary tests to secure the technology and determine the joining parameters.

7 Jun 2010: Punch stroke versus displacements is acquired during test bymeans of proper measurement devices. ... Fig. 2. A) Load-Displacement curve; B) FEA model of the experimental test.

7 Jun 2010: Parantheses denote unbroken tests Total testing hours: 17,852,130. Number of test results in time interval. ... Number of test results in time interval. In Europe long-term creep tests are carried out and coordinated by the European Creep Collaborative

7 Jun 2010: type test). Overall. pressure. ratio. 1970s. 1980s. 1990s. 2000. Cruise SFC v OPR & TET. ... T890. T895. T772. 1975. 2000. 1300. 1600. Type test temperatures of RB211 & Trent HP turbine blades.

7 Jun 2010: Bolt Seat Test FE Simulation Burst Test FE Simulation. Fretting Phenomena Example and FE Modelling. ... Welding joint tests are still going on. Tab 2. Results of roll and cornering fatigue tests of DP600 and AISI304L disks wheels The resistance to the

7 Jun 2010: The fatigue limit (obtained by HCF test) was slightly higher in welded normalized steel than in welded TMCP steel. ... Gage section included base metal, HAZ and weld metal, locating HAZ at the middle of the gage length [8].

7 Jun 2010: A way of bridging between mill acceptance tests and field situation is proposed. ... 1. STATE OF THE ART Acceptance tests and their use Classically, the Charpy V Notch test (CVN) is used to qualify a pipe regarding crack failure risk.

7 Jun 2010: The centre of the HAZ coincided with the middle of the gage length. ... CFI tests were performed with strain-hold of 10 minutes at tensile peak strain as the same temperature with LCF test.