Search

20 Jul 2004: It is also unlikely that AFRP or CFRP will be economic for flexure. ... Bent pultrusions, however, will never be economic. 4.4 Internal confinement for compression.

8 May 2002: Actuator. Water. Figure 4: Schematic diagram of test apparatus. The tests reported here were carried out with the centrifuge axis vertical so that the sum of the 10g. ... Loose cyclic test: C1. 7. The monotonic tests consisted of a simple pullout where

27 Mar 2010: Figure 14. Variation in tendon force during ultimate load test. After the beam test, portions of both tendons were subjected to direct tension tests; both achieved strengths of 625 kN, which ... The test further shows that the use of FRP to make

15 May 2014: integrated models of GSHP systems and to test these models with case studies of existing GSHP. ... incorporating this uncertainty in the design and economic evaluation of full-size (i.e.

11 Jul 2007: Thirdly, the program was used to predict the failure mode anderimental tests on concrete slabs. ... Values ranged from 0.87 in test A2 to 1.33 in test C2, with the range being between 1.04 and 1.33 for the first 11 tests.

22 Aug 2001: 2.2 Some remarks about calibration chamber tests. 3 Centrifuge Tests. 3.1 Test programme. ... 3.1 Test programme. The detail and geometry of the tests are tabulated in Table 1.

11 Jul 2007: The test program was designed to examine the effectiveness of spirals as lateral reinforcement. ... Fig. 9 shows the shear load test comparison for the cycled and the reference beams.

9 Nov 2001: models32 etc. The code rules are mostly based on a set of tests. ... Would. such a bridge be economic? It is made from a rectangular block.

2 Aug 2011: Further details ofthe experimental set-up are described by Cheuk 2005. Test Materials. ... The soil densityvaried by 1.5% ensuring repeatability. Test Program. A series of four tests involving two grain sizes and two relativedensities 30 and 90% was

11 Jul 2007: Two different yield criteria were considered in Ref [16] both of which approximate observed results from tests on standard monolithic specimens. ... section. Using fc in lieu of Neilsen’s use of the compressive test strength (fcu ) the reinforcement