Search

7 Jun 2010: The bonding time for all samples was 1 hour. Some of the samples were post-bond heat-treated at 1150˚C for 24 hours. ... Having heat-treated the already bonded C1023 sample at 1150˚C for 24 hours, back-scatter electron SEM imaging and EDS were used to

7 Jun 2010: VM 12 (values of a real heat [7]) 0,11 0,45 0,2 11,5 0,23 0,28 0,24 1,40 0,06. ... SMAW 0,064 0,47 0,56 2,38 0,97 0,24 0,043 0,008 0,022 0,0030 SMAW Nb-mod.

29 Sep 2010: Corresponding author, email a.shirzadi@open.ac.uk. 2010 Institute of Materials, Minerals and MiningPublished by Maney on behalf of the InstituteReceived 22 March 2009; accepted 24 May 2010DOI

7 Jun 2010: 2. Wt% C Si Mn P S. Tube A and B 0.011 0.24 1.68 0.016 0.002. ... 25.04 21.87 2.15 0.0027 0.124. 24.91 22.04 2.14 0.0027 0.117. Table 1: Composition of the tubes provided by KST, tube A

7 Jun 2010: steels, as the carbon content is usually in excess of 0.1 wt% [23, 24]. ... mechanical properties with an improved formability compared to the. conventional C-Mn-Si TRIP-assisted steel [24].

7 Jun 2010: 1.98 1.02 0.24 - 1.54 -. D 0.78 1.49 1.95 0.97 0.24 - 1.60 0.99 Apart from controlling the oT ′ curve and Bs

7 Jun 2010: 2000. 1500. 1000. 500. 18%. 24%. 27 - 28%. 3,800 3,800 –– 4,0004,000. ... 4000. 0. 3500. 3000. 2500. 2000. 1500. 1000. 500. 18%. 24%.

7 Jun 2010: Length Strength, GPa Reference. 460 nm 150 251.8 mm 24 262.9 mm 28 266.0 mm 39 266.5 mm 20 266.7 mm 35 266.9 mm 63 ... 1.54 610.78 1.49 1.95 0.24 0.97 1.60 0.99 61.

7 Jun 2010: 970 Materials Science and Technology 2008 VOL 24 NO 8. The method for deriving (c J a) given the twinning planeand direction is fully described in Ref. ... Plastic strain due to twinning in austenitic TWIP steels. Materials Science and Technology 2008

7 Jun 2010: 824 MJ/Mg = 24 %. 3495 MJ/Mg = 100 %. 2140 MJ/Mg = 61 %. Fig. 10: Primary energy expenditures for CSC, CSP and DSC (casting and rolling) It becomes obvious that the primary ... SPITZER, Deformation and mechanical properties of high manganese TRIP alloys,