Search

30 Jul 2012: The processing steps are shown in Fig. 1 and are summarised as follows. Step I: Fibres are produced through a gel‐spinning/hot drawing process [24,25].

29 Aug 2012: 0 0.05 0.1 0.15. as-received. after 24 h at 150. true. ... Subsequently, the deformed specimens were placed in. an air furnace at a temperature of 150 C for 24 h, and thecompression tests were repeated.

2 Aug 2012: 500 0.6 0.39 0.28 0.69 0.24 0.14. 1.2 0.23 0.21 0.39 0.16 0.12. ... Clamped 300 0.6 0.42 0.34 0.69 0.38 0.44. 1.2 0.25 0.24 0.39 0.22 0.27.

2 Aug 2012: snubbing was first applied to fibre reinforcements by Li [24]. D.D.R. ... laminate. Mechanics of Advanced Materials and Structures, in press. [24] Li VC, Wang Y, Backer S.

19 Jul 2012: µfQp2ρfkp. (24). Sin is the saturation of the input slurry, defined as the ratio of the volume. ... is re-written via (23) and (24) as a relationship between the dimensionless.

2 Aug 2012: Int J Impact Eng 2000;24:277–98. [4] Klintworth JW. Dynamic crushing of cellular solids.

3 Aug 2012: 24 and Hashin 25 for fiber composites, as. SIMPLY SUPPORTED. δ (mm). ... 24. A full description of the damage model isgiven in the Appendix.

6 Mar 2012: 5b. The response was linear elastic with stiffness approximately equal to 2.3 GPa consistent with a wide body of experimental data on the bulk modulus of water [24]. ... Comp.: Part B 39 (2008) 83–91. [24] W.P. Graebel. Engineering fluid mechanics.

2 Aug 2012: Article history:Received 12 November 2009Received in final revised form 24 March 2010Available online 2 April 2010.

26 Sep 2012: 24. so the rate of out-of-plane sintering in Fig. 8a is the same for 4 3  equal to 4.26 and.