Search

14 Feb 2014: In contrast, within the fusion zones of all welds compressive longitudinal stressesare seen in the range -200 to -400 MPa. ... The compressive stress in weld D is comparatively lower in magnitude, being 200 MPa, butcovers a much larger region and remains

24 May 2014: for different cooling rates assuming zero and 200 J mol1 stored energy contributing to the chemical free energy change. ... steel for different cooling rates assuming zero and 200 J mol1 stored energy contributing to the chemical free energy change.

26 Jan 2014: 4b. (a) (b). Figure 4: Data for all textures for a stress of 200 MPa applied along the z-axis.

16 Mar 2014: 2 ExperimentalSA508 Grade 3 material was obtained from a produc-. tion component, having been cast as part of a large 200-tonneingot before being forged, quenched and tempered. ... Trans-mission electron microscopy was undertaken using a JOEL200CX

16 Dec 2014: Therefore, over thegrain size (measured as a mean lineal intercept) range relevant in the presentwork, 100 – 200 µm in Fig.

16 Mar 2014: This sample was taken from a forged production com-ponent, which had been cast as part of a 200-tonne ingot.

23 Jul 2014: Integrated intensities of (200)α, (211)α, and (220)γ,(311)γ peaks were used for the evaluation of austenite fraction.

29 Aug 2014: of! an! alloy! similar! to! 52100! steel! (fig! ... 200!to!250!µm,!long!grain!boundary!cracks!parallel!to!the!sample!surface!could!be!observed!Finally,!from!a!depth!of!300!to!1000!µm,!a!family!of!martensite!plate!cracks!

25 May 2014: More recent work on nanostructured bainite that. typically forms during transformation at 200 C [36], has found that the shear strain associated with the slender plates of bainitic ferrite can be

26 May 2014: More recent work on nanostructured bainite that. typically forms during transformation at 200 C [36], has found that the shear strain associated with the slender plates of bainitic ferrite can be