Search

27 Dec 2012: speed of 2 mm min1, using sub–sized test coupons according to the ASTM. ... the late onset of necking during tensile tests. The austenite should not all.

24 Aug 2012: tion of the orientation of the test sample relative to the rolling and transverse. ... maximum’ and ‘minimum’ represent the values of J at a given test temperature.

22 Apr 2012: deep V–notch, were used in tests conducted between ambient temperature to -100C. ... representing three tensile tests at each orientation. The transverse orientation is the strongest.

3 May 2012: Experiments were therefore designed to test thetwo sets of calculations. This is because the data published in the original work byLuzginova et al.

2 Oct 2012: Solidification experiments are reported in order to test the non–equilibrium retention of excess δ–ferrite in the microstructure observed atambient temperature.

26 Aug 2012: during the tensile test through hydrogen transport via dislocations, thereby. increasing a crack initiation there. ... 4.2.4 Mechanical Test…………………………………………….69. 4.2.5 Hydrogen Microprint

29 Jun 2012: ASTM E399-09, A. (2009). "Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials.“ ASTM E1290-08, A. ... 2008). "Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement.".

15 Dec 2012: cementite. Fracture surfaces from the tensile. test on the specimen transformed. ... dispersed in the matrix. In tensile tests, the steel. demonstrated a proof stress of.

16 Aug 2012: 5 mm section and 20 mm. gauge length) for tensile tests were sintered in graphite dies.

2 Oct 2012: testing for any sign of wear or damage. These tests, although laborious and resource intensive, do not span the entire range of.