Search

19 Mar 2010: the design life is to apply extrapolation techniques to short-. term test data. ... 0.54 fu after 50 years. Yamaguchi et al.13 carried out creep tests.

26 Mar 2010: But bent pultrusions will never be economic. 4.4 Internal confinement for compression. ... 31] Nelson, W., Accelerating Testing: Statistical Models, Test Data and Data Analysis, 1st edition,.

26 Mar 2010: FIBRE REINFORCED POLYMERS – STRENGTHS, WEAKNESSES,. OPPORTUNITIES AND THREATS. Chris BURGOYNE Department of Engineering, University of Cambridge, UK Keywords: economics, strengths, weakness, applications, design. ... So once again we are being forced

27 Mar 2010: Figure 14. Variation in tendon force during ultimate load test. After the beam test, portions of both tendons were subjected to direct tension tests; both achieved strengths of 625 kN, which ... The test further shows that the use of FRP to make

3 May 2010: c mob/cu. Figure 1 Normalisation of shear stress-strain curves from cyclic torsional tests on clays. ... accounted for if the data of compression and extension tests were separately available.

4 Aug 2010: 35]. Morelong term corrosion tests are needed to establish relationshipsbetween corrosion rates and environmental properties. ... 2] I. Balafas, 2003. Fibre-reinforced-polymers vs steel in concrete bridges: structuraldesign and economic viability.

12 Oct 2010: It has been concluded that the Stepped Isothermal Method can be used to produce test results in reasonable time scales. ... With terminations at both ends of a rope in a tension test, the rope normally breaks away from the termination.

3 Feb 2010: Dynamic centrifuge tests have been conducted on small-scale tunnel models for this purpose. ... These deformations were measured using Particle Image Velocimetry (PIV) technique for the first time in a dynamic centrifuge test involving earthquakes.

16 Feb 2010: Laboratory single and simultaneous injection tests were performed on kaolin clay to investigate the effect of overconsolidation ratio, grout material properties (grout viscosity and water cement ratio), grout injection volume, radial ... The effect of

24 Feb 2010: desiccation (due to groundwater fluctuation and weathering action), mix proportion of ingredients, and scale (or size) of test section. ... A conceptual framework for constitutive modelling is proposed based on the triaxial test results.