Search

21 Sep 2004: delamination fracture tests, especially those featuring high-. resolution measurements of crack displacements and. ... to seat the specimen halves in the loading jig. 3.2. Shear tests.

7 Jul 2004: Akisanya et al. [7] have measured the sensitivity of the yield surfaceshape to the deformation path by conducting triaxial tests on copper powder.

8 Nov 2004: 8 5 1. 4. Measurement protocol. Compression tests were performed in the out-of-plane, 3-direction, of the woven core sandwich plates, as sketchedA screw-driven test machine was used ... core. The applied load was measured using thecell of the test machine

1 Jul 2004: These predictions are compared to exmental results obtained from triaxial tests on an aggregate of s. ... de-af-. ansti-. is. computed by means oftrue triaxial tests, wherein the three prin-cipal stresses depicted in Fig.

7 Jul 2004: 3] for mono-tonic shear: fatigue tests were performed at 20 Hz on. ... 7.Repeat tests confirmed that the scatter in stress–strainresponse was negligible for face sheets of any giventhickness.

7 Jul 2004: 7a). The maximum load and the stiffness measured in each test aresummarized on Table 3. ... the imperfection causes a marked reduction in the stiffness.Images taken during the test (Fig.

7 Jul 2004: fatigue tests: at the end of the fatigue test, when the. ... The specimen was then re-loaded and. the test was resumed. In the fatigue tests theunloading modulus was calculated from the changein axial strain upon reducing the applied stress.

7 Jul 2004: Tests at thestrain rates in the range 103}100 s1 were performed using a servo-hydraulic test machine, whiletests at strain rates in the range 1000}5000 s1 were performed using ... Tests at e5 "103}100 s1 were performedusing a servo-hydraulic test machine,

7 Jul 2004: Its originality lies in two main points: firstly,. we use original test conditions. ... tests (e.g. test no. 1 for dry sugar at _ea 0:16%/s).In order to overcome this difficulty and accurately.

7 Jul 2004: Figure 1 showsa schematic of the indentation test set-ups. Cyclic indentation tests were also performed in load control at a test frequency of 20Hz and at a loadratio R 5 ... The maximum and minimum values of the load and the displacement, and the number