Search

7 Jun 2010: of the subject, incorporating aspects of science, engineering and economics. The entire range. ... a proper discussion of dent–resistance and the test used to characterise this largely aesthetic.

7 Jun 2010: Fig. 5 Fatigue test results. The tests under variable amplitude loading were carried out with a base Gaussian spectrum and a base Gaussian spectrum superimposed with Gaussian distributed overloads, Fig. ... 10. FRACTURE MECHANICAL TESTS For the base

7 Jun 2010: b) joint: E911, pipe-Øa: 336 mm, wall thickness: 62 mm. Test temp. ... b) joint: P92, pipe-Øa: 300 mm, wall thickness: 40 mm. Test temp.

7 Jun 2010: A way of bridging between mill acceptance tests and field situation is proposed. ... 1. STATE OF THE ART Acceptance tests and their use Classically, the Charpy V Notch test (CVN) is used to qualify a pipe regarding crack failure risk.

7 Jun 2010: Transformation of the full ferrite phase provided a good condition for ultrasonic test. ... In addition, short term creep tests at 600oC were performed to meet the requirement.

7 Jun 2010: Specimen 3 - Experimental Test. Maximum or Limit Bending Moment. c) Bending moment – curvature relationship. ... et al. (2005): “HOTPIPE JI PROJECT- Experimental Test and FE Analyses”, OMAE Paper No.

7 Jun 2010: Table 2 Mechanical properties with different process Tensile Test Impact Test Bending. ... Fig 1 shows some application cases. 2.3 ECONOMIC EFFECTS Table 3 shows the material saving results of one high strength steel substituted the other lower strength

7 Jun 2010: The tests were performed on strip specimen at ambient temperature. The statistics are based on 56 individual test results. ... But the economic transport of gas over very long distances requires additional cost cuts.

7 Jun 2010: to a road test, it was necessary to build a drivable experimental spaceframe for systematic tests using thermal joining (welding). ... Performance of preliminary tests to secure the technology and determine the joining parameters.

7 Jun 2010: constituents. The tests used an atmosphere of 15 vol % CO2 10 vol % H2O 1 vol % SO2 with balance N2 , and the test specimens were coated with a synthetic coal ash, K2SO4 ... A large creep test matrix is presently underway covering two major test