Search

2 Dec 1998: From the tests conducted, it was found that the GRP enclosure significantly enhanced the behaviour of the composite structure in global bending and torsion. ... Results from the program compared well with published test and other theoretical data, and

21 Jul 1998: DSC tests;. tension tests at different constant temperatures;. tension tests with different strain rates;. ... Phenomenological constitutive model. A phenomenological constitutive model based on two kinds of tests (the standard tension test, carried out

21 Jul 1998: Torsional tests, thermal cycling under different torques, and normal tension and thermal cycling tests were carried out on Nitinol bar with diameter of 6.5 mm. ... We present a phenomenological model which is based on tension test, carried out at

18 Nov 1998: Torsional tests, thermal cycling under different torques, and normal tension and thermal cycling tests were carried out on Nitinol bars with diameter of 6.5 mm. ... We present a phenomenological model which is based on the tension test, carried out at

21 Jul 1998: These tests are the standard tension test, carried out at different constant temperature, and the thermal cycling test under different constant loads. ... Two additional tests are carried out, the Differential Scanning Calorimeter test, which determines

5 Feb 1998: Last few purchases. Reactivate Classics (1998) Tony de Vit Live in Tokyo (1997) React Test Seven (compilation sampler 1997 CD117) Romeo and Juliet (music from the film, 1997) Vivaldi, Gloria and ... Beatus vir (Naxos, 1994) Salome (Strauss) An

17 Dec 1998: I developed drum centrifuges in Cambridge to reduce the cost of centrifuge tests, to improve the accuracy, and reduce the labour and the time needed for any one test series. ... Our test data are used to validate numerical models and our small scale

12 Aug 1998: Hudson tests Kite tests Test No. H1 H2 H3 H4 K1 K2 K3 K4 Ptest (kN) 29.2 28.3 27.9 19.0 23.4 23.5 24.1 ... 1.05 1.18 1.28 Collins tests Antill tests Test No.

21 Jul 1998: Several tests were carried out on this one-way actuator, both in the one-disk and three disk configurations. ... Working torques used in the test varied from -0.2 Nm to 0.62 Nm.

23 Sep 1998: To provide a basis against which such theoretical models could be validated, a series of tests on concrete prisms, with and without steel reinforcement, and strip-loaded through rigid plates, was ... The method was shown to be capable of predicting both

25 Nov 1998: line through the large quantity of test data in the literature has also a slope of approximately 1.5. ... The most obvious explanation of the difference is that the open-topped shells in the present study are Ôstatically determinateÕ, whereas the usual

17 Nov 1998: shells. The work begins with the simpler case of the cylindrical shell and encompasses tests on a range of simplified models that have been proposed in the literature, but which have

23 Sep 1998: Tensile tests on cruciform specimens with different welding configurations, finger geometry and layout have shown that the load carrying capacity depends more on welding configuration than on finger profile.

23 Sep 1998: Tests on a 3.48 m diameter models have demonstrated the feasilibility of these concepts.

29 Nov 1998: The magnitudes (and colours) are internally calibrated. Tests on the Northern catalogue show that the colours are consistent to /-0.2 magnitudes and the magnitude faint end zero-points are consistent

28 Jan 1998: If valid, this would be of greater significance than homeopathy itself, and it attests to the limited vision of the modern scientific community that, far from hastening to test such claims,

13 Aug 1998: The statistical measures generatedfor each study (commonly referred to as “test statistics”, e.g. ... He expresses this (p. 20)as:. Test of significance = Size of effect Size of Study.

30 Nov 1998: on each axis. However, for more realistic tests involving measuring the whole plate, taking it off, and then measuring it again sometime later, the rms repeatibility is.

5 Dec 1998: CIRSI Overhead Timing tests. carried out on 03/04 Nov 1998 at 02am by rgm.

15 Nov 1998: This can be used to switch to local mode temporarily to take a test exposure.