Search

11 Jul 2007: Thirdly, the program was used to predict the failure mode anderimental tests on concrete slabs. ... Values ranged from 0.87 in test A2 to 1.33 in test C2, with the range being between 1.04 and 1.33 for the first 11 tests.

11 Jul 2007: Two different yield criteria were considered in Ref [16] both of which approximate observed results from tests on standard monolithic specimens. ... section. Using fc in lieu of Neilsen’s use of the compressive test strength (fcu ) the reinforcement

11 Jul 2007: Failure of these structures causes great economic losses, serious impediment to post-earthquake emergency operations and long-lasting disruption of social and economic life. ... Element tests were carried out to evaluate the performance of sand under

11 Jul 2007: 1 INTRODUCTION Experimental studies with reinforced concrete structures demonstrate that to achieve the ductility that you plan to study, the experimental test pieces have to be designed very carefully [1]. ... Microzonation study). Casualty model. Loss

11 Jul 2007: The test program was designed to examine the effectiveness of spirals as lateral reinforcement. ... Fig. 9 shows the shear load test comparison for the cycled and the reference beams.

29 Nov 2007: In all simulations and tank tests, PITT-based PCE volume estimates showed wide ranges of accuracy, ranging from 70% under prediction to 20% overprediction.

5 Apr 2007: American Institute of Aeronautics and Astronautics. V. Compression Tests. Compression tests on thin composites are notoriously difficult, as the failure mode of interest is fibremicrobuckling but other test-dependent failure modes ... Instron cross head.

29 Nov 2007: Seismic behaviour of MSW was then studied by performing dynamic tests on landfill models with the model waste. ... The criteria for crack initiation in clay were investigated by performing 4-point bending tests on consolidated clay beams.

30 Nov 2007: ACI Structural Journal, 89(1), 13-19. 1992 A design-build-test project on bridge erection. ... 1992 A design-build-test project on bridge erection. In 'Education for Structural Engineering', ed.

6 Nov 2007: Experiments, including Tension, bending and torsion tests are performed to characterise the behaviour of PP/Glass laminated composite.