Search

2 Dec 1998: From the tests conducted, it was found that the GRP enclosure significantly enhanced the behaviour of the composite structure in global bending and torsion. ... Results from the program compared well with published test and other theoretical data, and

31 Mar 2004: In this work, a series of dynamic centrifuge tests were performed on a rigid foundation supporting a containment structure. ... The model test data obtained from the present centrifuge tests can be used to improve the design of the foundation of a high

29 Feb 2000: Values ranged from 0.87 in test A2 to 1.33 in test C2, with the range being between 1.04 and 1.33 for the first 11 tests. ... Hudson tests. Kite tests. Collins tests. Antill tests. Test No. H1.

12 Oct 2010: It has been concluded that the Stepped Isothermal Method can be used to produce test results in reasonable time scales. ... With terminations at both ends of a rope in a tension test, the rope normally breaks away from the termination.

22 Aug 2001: 2.2 Some remarks about calibration chamber tests. 3 Centrifuge Tests. 3.1 Test programme. ... 3.1 Test programme. The detail and geometry of the tests are tabulated in Table 1.

20 Jul 2004: 1. AAACCCMMMBBBSSS MMMCCCAAAPPPCCC IV. ECONOMIC VIABILITY OF STRUCTURES WITH FRP REINFORCEMENT AND PRESTRESS. ... 6]. Nelson, W., Accelerating Testing: Statistical Models, Test Data and Data Analysis, 1st edition, Willey.

20 Jul 2004: It is also unlikely that AFRP or CFRP will be economic for flexure. ... Bent pultrusions, however, will never be economic. 4.4 Internal confinement for compression.

22 Nov 2004: A better understanding of this soil-structure interaction problem is urgently needed so that safe and economic designs can be achieved. ... Distinct soil failure zones were identified at the end of the tests, i.e.

4 Oct 2011: Submitted to ACI Structural Journal. Balafas I. and Burgoyne C.J., Economics of beams reinforced and prestressed with FRP. ... Burgoyne C.J., Tests on beams prestressed with polyaramid tendons, Procs 1st Int.

11 Jul 2007: Failure of these structures causes great economic losses, serious impediment to post-earthquake emergency operations and long-lasting disruption of social and economic life. ... Element tests were carried out to evaluate the performance of sand under

20 Mar 2000: Fig. 1: Bonded plates on test beams. 2 Reports Structural Engineering International 4 / 99. ... time.Similarly, the use of GFRP compositesfor complete structures is proving tobe economic when there are access dif-ficulties for building conventionalheavy

24 Aug 2001: John D McKinley, Cambridge University. Geotechnical Engineering Group. Abstract. Civil Engineers have used grouted ground anchors to transmit tensile loads into the soil because of the technique’s economic and practical ... The calculated values for

8 Apr 2011: Eight tests using. 4. SIM and four tests using SSM were conducted at each load level. ... rs---. --. 100. yrs. -----. 1000. 0 yr. s---. --. CCTSIMSSM datafitted regression line90% PI from creep tests.

8 May 2002: Actuator. Water. Figure 4: Schematic diagram of test apparatus. The tests reported here were carried out with the centrifuge axis vertical so that the sum of the 10g. ... Loose cyclic test: C1. 7. The monotonic tests consisted of a simple pullout where

31 Aug 2001: Is this because thetechnology is wrong? Are the economics wrong? Are engineers too conservative? ... There will thus need to be research before economic designrules can be introduced.

15 May 2014: integrated models of GSHP systems and to test these models with case studies of existing GSHP. ... incorporating this uncertainty in the design and economic evaluation of full-size (i.e.

27 Mar 2010: Figure 14. Variation in tendon force during ultimate load test. After the beam test, portions of both tendons were subjected to direct tension tests; both achieved strengths of 625 kN, which ... The test further shows that the use of FRP to make

25 Apr 2005: Fig. 1 shows the test dused, together with notional views of the scale and shape peters. ... However, because the test set of data containecompleted tests, the analysis has been carried out only fordata.

11 Jul 2007: Two different yield criteria were considered in Ref [16] both of which approximate observed results from tests on standard monolithic specimens. ... section. Using fc in lieu of Neilsen’s use of the compressive test strength (fcu ) the reinforcement

2 Aug 2011: Further details ofthe experimental set-up are described by Cheuk 2005. Test Materials. ... The soil densityvaried by 1.5% ensuring repeatability. Test Program. A series of four tests involving two grain sizes and two relativedensities 30 and 90% was