Search

27 Aug 2004: 3. A. screw-driven mechanical test machine was used as the actuator: the two nodes of the. ... load cell of the test machine while the displacement of the two loading nodes was.

6 Mar 2012: The compressive response of the sand slugs was measured in a screw-driven tests machine. ... The tests were conducted at an applied strain rate 3 -110 s .

27 Jul 2009: In this test, a metallic foil of thickness in the range 10–150 lm is bent over a circular cylindrical bar whosediameter sets the value of applied curvature. ... The bending test is a complementary test method to the wire torsion test of [10].

28 Jan 2014: to monolithic beams of equal areal mass; in these tests, the prismatic axis of the cores was aligned with the longitudinal axis of the beams. ... 7a: a pen-line was traced along the inner clamped boundaries of the plates prior to each test, and the line

22 Aug 2019: to -5 11.67 10 l s at a test temperature equal to 30 ̊C. ... mechanism maps were constructed by performing a series of uniaxial tension tests on the high.

27 Jul 2009: Geometry C (Fig. 2(c)): an unpassivated ferroelectric island withelastic electrode layers, on a Si substrate; this geometry istypical of a laboratory test structure. ... This ge-ometry represents an idealised laboratory test structure withelectrode

17 Jul 2006: Benallal, A., Tvergaard, V., 1995. Nonlocal continuum effects on bifurcation in the plane strain tension–compression test. ... 887.Stölken, J.S., Evans, A.G., 1998. Microbend test method for measuring the plasticity length scale.

21 Feb 2019: J = Je Jp (62). 2Standard No. ASTM E 1820-01 “Standard Test Method for Measurement of Fracture. ... Stölken, J. S., Evans, A. G., 1998. A microbend test method for measuring.

16 May 2002: The predictions are compared with exper-imental observations from tests on an octet-truss material made from an aluminiumcasting alloy (LM25). ... b) Uniaxial tensile response of the as-cast LM25 aluminium alloy. Uniaxial compression tests in the

25 Mar 2004: et al., 1999) and using multi-axial test data (Huber an2001; Landis, 2002). ... Fig. 9. Modelled responses to a proportional loading test with uniaxial stress and electric field for (a) PZT-5H, (b) PZT-4D and (c)Titanate.

26 Aug 2005: Thisstrength is found from independent tests conducted at con-stant strain-rate in a range consistent with the misfit imposedby the growing TGO.

5 Sep 2019: sive layer has been gained through tests on End-Notched Flexure (ENF) and. ... 43. [8] C. C. Chen, D. G. Linzell, Modeling end notched flexure tests to estab-.

17 Dec 2015: To test this, a compression test on a. specimen with a notch was repeated by first sharpening the notch root by a razor blade. ... Numerical investigation of progressive damage and the. effect of layup in overheight compact tension tests.

7 Jul 2004: Soutis et al. use coupon tests to measure both the unnotched strength and the compressive ‘tough- ness’ of the laminate. ... Compression tests on a small specimen of 924C Ciba-Geigy epoxy matrix show a non-linear elastic behaviour for strains of less

11 Jun 2003: test machine. All tests were performed at a nominal macroscopic strain rate of 103 s1.The applied load P and the relative displacement u of the platens were recorded andplotted in ... The loading platens werecovered with PTFE tape to reduce friction, and

7 Feb 2009: In contrast, no size. effects were observed in the tension tests.

7 Jul 2005: 3). Thatfor the bond coat,σTBCY , is determined from tensile test data[21]. ... The dominant particles areassumed to have density,ρp = 4000 kg/m3, representativeof the alumina used in the erosion tests[14].

25 Sep 2006: Fatigue tests on centre-cracked GLARE speci-mens performed by Takamatsu et al. ... 5. Comparison with fatigue experiments. The delamination fatigue model presented above is nowvalidated to test data of constant amplitude fatigue exper-iments on ARALL

28 Jun 2006: In such tests, the size and veloc-ity of the impacting particles responsible for specific damagesites are unknown.

7 Jul 2004: stress amplitude at a fatiguelife of 107 cycles in a fully reversed fatigue test. ... Advis. Commun.Aeromaut. Rep., 1954, No. 1, 170. 15. Buessem, W., The ring test and its application to ther-mal shock problem.

4 Jun 2005: 5.2 Three-point bending experiments on the modified octet truss. Test specimens were prepared by investment casting with the aluminium alloy LM25 (Al-Si 7-Mg 0.3 wt%). ... This was confirmed by post-test examination: Thespecimen hinged at mid-span. This

10 Feb 2005: In tensile tests on thin metal-lic strips a decrease of the apparent strengthwith specimen thickness has been reported [3].Bending and torsion tests, on the other hand,show a substantial ... Multiplication of this equation by a Q-periodic,vector-valued

20 Jul 2007: 2. Experiments. Uniaxial tension tests have been conducted on commercially pure aluminium in order toobserve the surface profile near grain boundaries during plastic deformation.

7 Jul 2004: a53S1/2np1np D1/2 (6)Consequently, instead of probing the shape of the initial yield surface and its sub-sequent evolution from complicated multi-axial tests, it appears from Eq. ... 6) thatthe yield surface can be estimated by simply measuringnp in a

4 Sep 2018: flake interactions [30–32], and unless reinforced by a binding agent, mechanical tests can. ... Each specimen was aligned. along the loading axis of the test system and fastened electrostatically to a parallel.

7 Jul 2004: Models of thistype reproduce reasonably accurately the uniaxial material response, when calibratedagainst test data. ... For the tests on the. 802 J.E. Huber, N.A. Fleck / J.

8 Aug 2009: Hence, it would collapse by local buckling in an unnotched strength test, but it would fail by the attainment of the tensile strength of the cell wall material in a fracture ... toughness test.

22 Dec 2008: A macro-hardness test is commonly used to measure the plastic strength of a composite.For example, He and Ma [4] report that the hardness of an Fe–Cu nanocrystallinecomposite is ... to determine the interface potential experimentally include

26 Aug 2015: proximations, so the best test of the prediction of the elastic gap must be one based onexperiments.

15 Feb 2006: Micro-torsion tests on copper wires show that the inferred shear strengthincreases with decreasing radius (Fleck et al., 1994). ... Micro-bending tests on high-purity nickel reveal thatthe material strength increases with decreasing foil thickness

25 Jun 2010: i) Triaxial tests by Davy et al. [6] on damp sugar revealed that the cohesive strengthbetween particles is negligible; consequently, the shear strength τ0 at the interfacebetween damp sugar and a ... The bulk viscosity µ hasbeen estimated from the

21 Feb 2019: simple test geometries such as a wire in torsion (Fleck et al., 1994), a beam in. ... G., 1998. A microbend test method for measuring. the plasticity length scale.

7 Jul 2004: the core. Tests on these structures are in progress to affirm the stiffness and strength, to ascertain thebending resistance of welded truss joints, and to establish limits on the realizable deformations

7 Jul 2004: The salient experimental details of these measurements are as follows.Sathiamoorthy used a Celanese test-rig to measure the compressive strength of a 24-ply unidirectionalcomposite, comprising Toray T800 carbon bres ... The specimens were loaded in a

6 Jul 2005: Acomprehensive characterization and comparison have beenmade to analyse the device performances through finiteelement analyses and electrical tests.

26 Nov 2020: fracture. 2. 1. Introduction. The corrosion of engineering structures is a common phenomenon with severe economic.

30 Mar 2004: of the core does not necessarily induce shear stress. They performed triaxial tests. ... W. (1997). Constrained buckling tests show. increasing compressive strain to failure with increasing strain gradient.

3 Oct 2020: measured from a mode I splitting test on a double cantilever beam specimen composed of a gesso layer. ... The delamination toughness. measured from the same test turned out to have a similar value, Γd = 100 N/m.

24 Jan 2006: 1. Full scale ship collision trials have confirmed the superior performance of succonstructions with no tearing observed on either the outer or inner hull in the collision test; in contrast, the

16 May 2002: Frictionless indentation of dissimilar elasticplastic spheres. Sinisa Dj Mesarovic a, Norman A Fleck b,. a Department of Material Science and Engineering, University of Virginia, Charlottesville VA 22903, USAb Department of Engineering, Cambridge

4 Aug 2023: Perspectives for Next Generation Lithium-ion Battery Cathode Materials. Samuel G. Booth,1,15,(a,b) Alisyn J. Nedoma,1,15(a,b) Nirmalesh N. Anthonisamy,1,15 Peter J. Baker,2,15 Rebecca Boston,3,15 Hugo Bronstein,4,15 Simon J. Clarke,5,15 Edmund J.

30 Sep 2020: 2(d) and (e)) of. relative density ρ = 0.1. The tensile response at a nominal tensile strain rate of 2104 s1 was measured using a screw-driven test.

27 Jul 2009: 1. This. s a common test geometry and is representative of practical ap-lications.

4 Sep 2018: simulation, ultrasonic, sonic resonance, and static test methods [S7,S14]. Multi-layered stacks give.

29 Mar 2023: 1. Void growth in metal anodes in solid-state batteries: recent progress and gaps in. understanding. S.S. Shishvana,b, N.A. Flecka, R.M. McMeekingc and V.S. Deshpandea. a Department of Engineering, University of Cambridge, Cambridge CB2 1PZ, UK b

2 Aug 2023: thickness. Recent micro-pillar compression tests [32-34] suggest that Li pillars in the micron. ... Such observations are desirable and will serve to further test the fidelity of the modelling.

29 Jan 2014: hardness test reported by Michal et al. (2006). The underlying annealed stainless steel.

16 Dec 2005: Therefore, pticular care has to be taken during the metal thermal actor test.

5 May 2015: It remains to manufacture and. test these lattices to confirm these predictions.

6 Jul 2005: Journal of the Mechanics and Physics of Solids49 (2001) 2245–2271. www.elsevier.com/locate/jmps. A reformulation of strain gradient plasticity. N.A. Flecka, J.W. Hutchinsonb;. aEngineering Department, Cambridge University, Cambridge, UKbDivision