Search

2 Aug 2023: In a preliminary set of tests with two extremes of substrate hardness (Hv? ... machine8. The test machine and indentation experiments were performed in an inert argon.

21 Jan 2022: tests is due to the incompressible nature of the core. The purpose of the present study is to test this. ... specimen sketched in Fig. 2. 2.2 Test protocol. Pinch tests were performed on both empty tubes (with free ends) and gel-filled tubes (with.

20 Jul 2012: these specimens and then conducting tensile tests in a screw-driven test machine. ... The compression tests were also performed in the screw driven test machine with the loads and strain measured in a similar manner to that described for the tensile tests

22 Jul 2020: adhesives in shear: torsional shear and combined tension-shear. Torsional shear tests include. ... 35. Introduction. Materials characterisation of the epoxy adhesive. Fracture tests on TAST specimens.

22 Feb 2023: The measured wet front height h versus time t for the ethanol-rise tests for all test. ... aforementioned test is compared with the original VTC and VTE tests in Fig.

5 Aug 2018: fed tests V(RF) and horizontal reservoir-fed test H(RF) in order to explore the role of gravity,. ... 3a for the sake. of clarity. Horizontal Reservoir-Fed tests H(RF). The geometry of the specimen in the Horizontal Reservoir-Fed test H(RF) is given in.

7 Jul 2004: A similarresponse has been observed previously [13] in deepnotch compression tests on the Alporas foam. ... TTAlcan 65T 89L 95. Alporas 84L, T and TT. 6. Fracture toughness tests.

4 Sep 2018: condition. 110. 111. 3 Test Methods 112. 3.1 Ballistic Tests 113. ... displacement responses from the repeated tests overlap one another for each material, 260.

4 Sep 2018: condition. 110. 111. 3 Test Methods 112. 3.1 Ballistic Tests 113. ... displacement responses from the repeated tests overlap one another for each material, 260.

29 Oct 2018: present an asymptotic analysis of the governing kinetic equation for the EP test. ... . that is considered to be representative for EP tests in Fe alloys.

7 Jul 2004: 7a). The maximum load and the stiffness measured in each test aresummarized on Table 3. ... the imperfection causes a marked reduction in the stiffness.Images taken during the test (Fig.

11 Feb 2022: 19]. and Kim et al [20]. A combination of tensile and shear tests is necessary, with the test specimens. ... 3. Experimental Protocol. Detailed tests are required to characterize the material and calibrate model parameters.

22 Jul 2020: compressed between two smooth plates within the test machine to measure the uniaxial. ... whereas in parts (c) and (d) the tests are for a0 = 20 mm.

29 May 2009: ound that the Metripol system was unable to identify |sin δ|,and I0/2 directly throughout the tests. ... The values ofsin δ| cycle several times during this test, indicating that multiplerders of birefringence are reached (δ π).

30 Mar 2006: 3. Results. 3.1. Tensile tests. The tensile test results are summarised in Table 2. ... 3.2. Compression tests. Three sets of compression tests were performed using the Celanese test rig, as summarised in Table 1.The uniaxial compressive stress versus

7 Jul 2004: fatigue tests: at the end of the fatigue test, when the. ... The specimen was then re-loaded and. the test was resumed. In the fatigue tests theunloading modulus was calculated from the changein axial strain upon reducing the applied stress.

7 Jul 2004: 3] for mono-tonic shear: fatigue tests were performed at 20 Hz on. ... 7.Repeat tests confirmed that the scatter in stress–strainresponse was negligible for face sheets of any giventhickness.

25 Oct 2010: 3. Mechanical tests. Micro-indentation and nano-indentation tests, and uniaxialension and compression tests were performed on specimens. ... 4. Hardness tests. Fig. 8 shows the hardness H as a function of contact depth h foroth composites.

16 May 2002: In unnotched tests, the specimens fail along the weakest plane, randomlylocated within the specimen. ... the current investigation due to limitations on the available size of materialsand test machines.

31 Mar 2007: single-lapshear rig. Fig. 4. Sketch of the single-lap shear test rig used for monotonic andcyclic tests. ... failed by core shear fatigue in the cyclic tests and by faceyield in the monotonic test.