Search

3 Aug 2012: Fig. 3a presents the measured responses for beams initially failing by face yield, together with photographs of the specimens after test. ... The differences between the three-points bend and the stretch-bend tests have been experimentally investigated

13 Dec 2023: loading of the lattice upon compressing between the platens of the test machine. ... tests for each orientation and strain rate. Recall that a single test result for the 45o orientation.

2 Aug 2023: diagnosis tests [5]. Cellulose sponges are also used in medical implants, and for dressings. ... versus time t in Figure 4(b) for 3 nominally identical tests (Test 1 - Test 3).

18 Jul 2023: Tensile tests were performed at. a true strain rate of 𝜀̇ = 103 s-1 by suitable control of the grip velocity during each test. ... test increase with decreasing thickness. A detailed analysis of size effects in both tests must.

24 Jul 2020: µm. Tests were performed in load control, with fixed loading and unloading rates of 40 µN/s and. ... C = 3 in their tests. Likewise, uniaxial compression tests on single crystal micro-pillars of Ni.

7 Jul 2004: loading platens. To overcome this, subsequent com-. pression tests were conducted using the dogbone. ... 4; the in-. itial modulus is the same as in the tensile tests.

9 Dec 2004: 318. 319. 320. 321. 322. 323. 324. 325. RREC2.1.2. Test procedureDirect compression tests were carried out using theCelanese compression rig. ... uniaxial test specimens. The overall geometry of these. plates is shown in Fig.

19 Nov 2009: A test method is thereby developed for the mode Ifracture toughness of the lattice. ... Smaller specimens thereby suffice forthe SENB geometry as a fracture toughness test method.

30 Jul 2012: The tensile tests were performed using a screw‐driven test machine at fixed displacement rate, ... wave propagation time of 0.5 µs for the yarn specimens of length 5 mm, as used in the highest rate tests. For comparison

4 Oct 2020: UHMWPE yarns by both quasi-static and dynamic tests. Additionally, Karthikeyan et al. ... indentation strength in the quasi-static tests also had a high failure impulse.

2 Aug 2023: In a preliminary set of tests with two extremes of substrate hardness (Hv? ... machine8. The test machine and indentation experiments were performed in an inert argon.

21 Jan 2022: tests is due to the incompressible nature of the core. The purpose of the present study is to test this. ... specimen sketched in Fig. 2. 2.2 Test protocol. Pinch tests were performed on both empty tubes (with free ends) and gel-filled tubes (with.

20 Jul 2012: these specimens and then conducting tensile tests in a screw-driven test machine. ... The compression tests were also performed in the screw driven test machine with the loads and strain measured in a similar manner to that described for the tensile tests

22 Jul 2020: adhesives in shear: torsional shear and combined tension-shear. Torsional shear tests include. ... 35. Introduction. Materials characterisation of the epoxy adhesive. Fracture tests on TAST specimens.

22 Feb 2023: The measured wet front height h versus time t for the ethanol-rise tests for all test. ... aforementioned test is compared with the original VTC and VTE tests in Fig.

5 Aug 2018: fed tests V(RF) and horizontal reservoir-fed test H(RF) in order to explore the role of gravity,. ... 3a for the sake. of clarity. Horizontal Reservoir-Fed tests H(RF). The geometry of the specimen in the Horizontal Reservoir-Fed test H(RF) is given in.

7 Jul 2004: A similarresponse has been observed previously [13] in deepnotch compression tests on the Alporas foam. ... TTAlcan 65T 89L 95. Alporas 84L, T and TT. 6. Fracture toughness tests.

4 Sep 2018: condition. 110. 111. 3 Test Methods 112. 3.1 Ballistic Tests 113. ... displacement responses from the repeated tests overlap one another for each material, 260.

4 Sep 2018: condition. 110. 111. 3 Test Methods 112. 3.1 Ballistic Tests 113. ... displacement responses from the repeated tests overlap one another for each material, 260.

29 Oct 2018: present an asymptotic analysis of the governing kinetic equation for the EP test. ... . that is considered to be representative for EP tests in Fe alloys.