Search

3 Oct 2020: Guo [14] conducted uniaxial tensile tests on polycarbonate (PC) nanocellular and microcellular foams. ... The. compression tests were conducted on a screw-driven test bench (Instron 5584 electromechanical.

24 Jul 2020: µm. Tests were performed in load control, with fixed loading and unloading rates of 40 µN/s and. ... C = 3 in their tests. Likewise, uniaxial compression tests on single crystal micro-pillars of Ni.

4 Oct 2020: UHMWPE yarns by both quasi-static and dynamic tests. Additionally, Karthikeyan et al. ... indentation strength in the quasi-static tests also had a high failure impulse.

22 Jul 2020: adhesives in shear: torsional shear and combined tension-shear. Torsional shear tests include. ... 35. Introduction. Materials characterisation of the epoxy adhesive. Fracture tests on TAST specimens.

22 Jul 2020: compressed between two smooth plates within the test machine to measure the uniaxial. ... whereas in parts (c) and (d) the tests are for a0 = 20 mm.

3 Oct 2020: nanocomposites. Single edge notch bend tests are conducted to relate the fracture toughness. ... uniaxial compression tests of the solid and cellular nanocomposites. The solid PMMA is.

3 Oct 2020: approximately 3 nm. A combination of indentation tests and multi-scale finite element. ... cycles were performed per test. Each loading and unloading segment were of 2s.

26 Nov 2020: fracture. 2. 1. Introduction. The corrosion of engineering structures is a common phenomenon with severe economic.

3 Oct 2020: measured from a mode I splitting test on a double cantilever beam specimen composed of a gesso layer. ... The delamination toughness. measured from the same test turned out to have a similar value, Γd = 100 N/m.

30 Sep 2020: 2(d) and (e)) of. relative density ρ = 0.1. The tensile response at a nominal tensile strain rate of 2104 s1 was measured using a screw-driven test.