Search

22 Nov 2004: A better understanding of this soil-structure interaction problem is urgently needed so that safe and economic designs can be achieved. ... Distinct soil failure zones were identified at the end of the tests, i.e.

12 Oct 2010: It has been concluded that the Stepped Isothermal Method can be used to produce test results in reasonable time scales. ... With terminations at both ends of a rope in a tension test, the rope normally breaks away from the termination.

17 Feb 2006: Displacement (mm). Fo. rce. (N. ). Test. Abaqus. Figure 12: Response to horizontal tip loads. ... Displacement (mm). Fo. rce. (N. ). Test. Abaqus. 6. Figure 13: Response to vertical tip loads.

31 Mar 2004: In this work, a series of dynamic centrifuge tests were performed on a rigid foundation supporting a containment structure. ... The model test data obtained from the present centrifuge tests can be used to improve the design of the foundation of a high

7 Jul 2004: The measurements from two nominally identical tests, both beginning with the rotation set. ... root hinge has significant curvatures both near the clamps and in the middle.

26 Jan 1999: Terzaghi’s analysis of test data considered Mohr’s circles at the end of tests. ... A typical early Imperial College drained test on the wet side of critical states had a duration that ensured that the pore pressure gradient from the middle to the

11 Jul 2007: Zero shear lines. Strong bands. Middle strip. Column Strip. 2 Consider a simply supported squar2a. ... and Kiat, C. H., “Test of a 14-column irregular flat-plate floor”, Research.

11 Jul 2007: Failure of these structures causes great economic losses, serious impediment to post-earthquake emergency operations and long-lasting disruption of social and economic life. ... Element tests were carried out to evaluate the performance of sand under

27 Mar 2010: These bond tests also neglect the effects from the presence of steel bars. ... COMPARISON BETWEEN FRP BOND CONDITIONS IN BOND TEST AND BEAM IN BENDING IC debonding starts at the level of the FRP from a cracked section somewhere in the middle of the

24 Aug 2001: John D McKinley, Cambridge University. Geotechnical Engineering Group. Abstract. Civil Engineers have used grouted ground anchors to transmit tensile loads into the soil because of the technique’s economic and practical ... The calculated values for