Search

31 Aug 2014: Austenite. 200. 17.3. 3.6218. 1.23. 220. 18.3. 3.6209. 1.23. 250. 21.4. ... Carbon / wt%. 200. 2.8721. 0.14. 220. 2.8706. 0.1. 250. 2.8621.

29 Mar 2014: 200. 400. 600. 800. 1000. Load. (µN. ). Displacement (nm). Non-charged H-charged. ... 0 50 100 150 200 2502.5. 2.8. 3.1. 3.4. 3.7. 4.0.

25 Nov 2014: Preprint submitted to Elsevier November 12, 2014. Journal of Magnetism and Magnetic Materials 378 (2015) 200-205. ... Samples were observed ina JEOL 200 CX with an accelerating voltage of 200 kV.

29 Aug 2014: DOI:10.1007/s40195-013-0006-2. 10. 400. 500. 600. 700. 0 50 100 150 200 250 300. ... γ{111}. γ{200} γ{113}γ{220}. 200oC. 220oC. 250oC. As-transformed. (b). 40 50 60 70 80 90 100.

21 May 2014: Heat Treatment Vickers hardness. 930 C 1h, air cooled to 200 C, held for 10 days, air cooled 622 13. ... Constant-depth nanoindentation was therefore used to tocharacterised changes on cross sections of the wear samples, prepared by polishing with 200

6 Dec 2014: b) 100 C h1 and (c) 200 C h1. For all the curves,. ... undeformed and deformed sample with heating rate of (a). 100 and (b) 200 C h1.

18 Sep 2014: 250 Cwhich took around 6 min, introduced to an oven for isothermal heat treatmentat 200 C for 10 days, and cooled in air. ... These lamellae were then ob-served using a JEOL 200CX transmission electron microscope (TEM), withan accelerating voltage of 200

18 Oct 2014: Introducing what is considered a conservative value of 200 J mol-1 for the stored energy due to deformation (with refer-ence to studies of hot rolling of mild steels) into

24 May 2014: Hydrogen diusion and thepercolation of austenite in. nanostructured bainitic steel. AUTHORS:Lucy Fielding a (corresponding author)Eun Ju Song b. Do-Kyeong Han b. Harshad Bhadeshia a,b. Dong-Woo Suh b. a Department of Materials Science and

13 Jul 2014: ENCUT 200 300 400 500 error. Eatom(Fe32), eV -8.222 -8.153 -8.144 -8.144 0.000.

14 Feb 2014: In contrast, within the fusion zones of all welds compressive longitudinal stressesare seen in the range -200 to -400 MPa. ... The compressive stress in weld D is comparatively lower in magnitude, being 200 MPa, butcovers a much larger region and remains

24 May 2014: for different cooling rates assuming zero and 200 J mol1 stored energy contributing to the chemical free energy change. ... steel for different cooling rates assuming zero and 200 J mol1 stored energy contributing to the chemical free energy change.

26 Jan 2014: 4b. (a) (b). Figure 4: Data for all textures for a stress of 200 MPa applied along the z-axis.

16 Mar 2014: 2 ExperimentalSA508 Grade 3 material was obtained from a produc-. tion component, having been cast as part of a large 200-tonneingot before being forged, quenched and tempered. ... Trans-mission electron microscopy was undertaken using a JOEL200CX

16 Dec 2014: Therefore, over thegrain size (measured as a mean lineal intercept) range relevant in the presentwork, 100 – 200 µm in Fig.

16 Mar 2014: This sample was taken from a forged production com-ponent, which had been cast as part of a 200-tonne ingot.

23 Jul 2014: Integrated intensities of (200)α, (211)α, and (220)γ,(311)γ peaks were used for the evaluation of austenite fraction.

29 Aug 2014: of! an! alloy! similar! to! 52100! steel! (fig! ... 200!to!250!µm,!long!grain!boundary!cracks!parallel!to!the!sample!surface!could!be!observed!Finally,!from!a!depth!of!300!to!1000!µm,!a!family!of!martensite!plate!cracks!

25 May 2014: More recent work on nanostructured bainite that. typically forms during transformation at 200 C [36], has found that the shear strain associated with the slender plates of bainitic ferrite can be

26 May 2014: More recent work on nanostructured bainite that. typically forms during transformation at 200 C [36], has found that the shear strain associated with the slender plates of bainitic ferrite can be

30 Aug 2014: 11.65. 0.37. -11.66. 0.37. 67.52. 0.73. Inclusion. 3-. 0.400.03. -0.200.02. -1.680.17. --. ... 12, pp. 200–206. [5] A. P. Voskamp: Microstructural changes during rolling contact fatigue:Ph.D.

1 Jul 2014: Due to the tensile stresses developed in the weld metal for weld 4 andthe compression (-200 MPa) in the same region for weld 1 (low MS filler), it.

6 Dec 2014: 200-450, especially lower bainite dominates when the transformation temperature. is less than 350 (Hollox et al.