Search

23 Nov 2019: The change in volume required toinduce the magnetic transition is about 5% [24,25]. ... 24 h with thecomposite periodically rotated in the field to magneti-cally align the particles as the resin solidifies.

25 Nov 2014: Recent research hasshown that even after significant cycling stressing, the austenite films ofnanostructured bainite in the regions of maximum subsurface shear stressdo not stress transform to martensite [24]. ... 24] W. Solano-Alvarez, E. J. Pickering, H

28 Jan 2012: welding parameters [44]. 24. Fig 2.16 several examples of external discontinuities in RSW [44]. ... 820 483 660 30 40. 840 486 665 30 39. 860 470 640 24 34.

11 Jun 2012: X-ray diffraction was used to determine the phasefractions, using Cu Ka irradiation at 40 kV and 40 mA.The sample was scanned over the 2h range 30–150u andthe fractions ... of ferrite and austenite were calculatedusing Rietveld analysis23,24 with the

17 Jan 2012: The microstructures of the weld nuggets are given inFig. 7 for cases where the current was 0?5 kA less thanImax. ... Table 4 Joint properties for commercial and investigated alloys. Carbon/wt-%Thickness/mm. Minimum weldcurrent/kA.

11 Oct 2010: Alloy Current, kA Nugget, mm. Tensile shear strength Cross-tensile strength. Maximum load, kN Fracture Maximum load, kN Fracture. ... Japanese Standards Association, Tokyo, Japan, 1978. 24. ‘Method of inspection for spot weld’, JIS Z 3140, Japanese.

4 Oct 2020: 24 shows how the lengthening rate now goes through a maximum, and it isoften assumed that the plate picks a radius consistent with the maximum growthrate. ... 28. (a) (b). Figure 24. (a) Influence of interface curvature on plate lengtheningrate.

12 Aug 2010: Service intervals are at about 500,000 pulses. The discharging currents vary, depending on the model, between 100 and 2000 kA. ... However, this is far from the truth, because the pulsed currents are supplied by the capacitors of the pulse generator (Fig

7 Jun 2010: force of 1.69 kN and a peak current of 8.1 kA. ... 24] H. K. D. H. Bhadeshia. Thermodynamic extrapolation and the martensite-start temperatureof substitutionally alloyed steels.

22 Feb 2011: 24. Colegrove PA, Shercliff HR. Sci Technol Weld Join 2004;9:352. 25. ... 27. Deng Z, Lovell MR, Tagavi KA. Manuf Sci Eng 2001;123:647.