Search

23 Oct 2006: Economic. constraints are primarily specified in terms of the overall manufacturing cost, although a. ... 16. Suspension 1 Suspension 2. FIG. 4: Experimental set-up for vibration tests.

30 Mar 2006: 3. Results. 3.1. Tensile tests. The tensile test results are summarised in Table 2. ... 3.2. Compression tests. Three sets of compression tests were performed using the Celanese test rig, as summarised in Table 1.The uniaxial compressive stress versus

10 Sep 2006: Conventional mechanical test machines are used to perform uniaxial tensile andcompressive stress versus strain tests at low to medium strain rates (103–101 s1). ... Appendix A. Force equilibrium in the split-Hopkinson pressure bar tests. The force

10 Sep 2006: Fig. 4 Sketches of tests used to measure the toughness of asolid, „a… the trouser tear test and „b… the scissor tear test. ... 5 mm in diam-eter at a similar speed to the human skin penetration tests.

2 Nov 2006: The. discharge characteristics of the liquid jet were measured using a custom-built test instrument. ... Yeoh, 1987)suggest that the measured toughness JIC is sensitive tothe type of test performed.

24 Apr 2006: Test material and experimental procedure. A series of shear collapse experiments has beenconducted on conical frusta. ... Introduction. Shear collapse experiments. Test material and experimental procedure. Measured collapse response in shear.

31 Jan 2006: Neglecting this contribution yields an error of<5% over the entire range of test conditions. ... Since the core crushing velocity inthe beam tests is roughly constant at prescribed impulse (Fig.

15 Feb 2006: 22 mm. These lengths correspond to the two core thicknesses employed in the sandwich tests. ... Test protocol. Experimental results. Finite element simulations. Constitutive description. Comparison of finite element predictions and measurements.

24 Nov 2006: Theseevices were fabricated by a four-mask process, and electrical tests have confirmed the stepwise increase of the capacitance with bias. ... A four-maskrocess was developed to fabricate these capacitors, and electri-al tests were performed on these

24 Jul 2006: The multiple data points at each m valuecorrespond to tests with different velocities vo, see figure 6. ... It comprises a water tube with a piston at one end and a test structure atthe opposite end.