Search

8 May 2002: Actuator. Water. Figure 4: Schematic diagram of test apparatus. The tests reported here were carried out with the centrifuge axis vertical so that the sum of the 10g. ... Loose cyclic test: C1. 7. The monotonic tests consisted of a simple pullout where

30 Jul 2002: A physicalmodel is built to analyse the feasibility of the concept and to test various deploy-ment schemes. ... A physicalmodel is built to analyse the feasibility of the concept and to test various deploymentschemes.

30 Sep 2002: However, experiments and full-scale load tests confirm that bridges are often able to carry loads well in excess of the theoretical capacity calculated using this approach.

7 May 2002: Armbruster, 1990. 3! '"1"! -. 1.3 Test fluid. The lighter than water Non Aqueous Phase Liquid used was Soltrol 220 (Phillips. ... what is happening inside the tank. In order to compare past test results obtained at CU with these experiments, the same

27 Sep 2002: This involves looking at the effect of uncertainty in non-destructive test methods on the decisions made with relation tobridge safety and also on bridge maintenance and repair actions.

28 Feb 2002: 2-. 2. Experimental Procedure The test series consisted of seven oil-saturated tests (SKH-5 to 11) and one dry test (SKH-12) carried. ... 2000). The results of test SKH-9 are plotted in Figures 18 & 19.

4 Mar 2002: 3-. 2. Experimental Procedure The test series consisted of five oil-saturated tests (SKH-13 to 17). ... This test consisted of a single circular flexible pile. in a liquefiable slope.

20 May 2002: SBP tests can also be carried out. In order to interpret the test, new geometry constants (shape factors), specific to the test cavity shape, were required. ... Tests were conducted at three natural soil deposit sites and one engineered barrier test site

13 Feb 2002: The test series has shown that macroscopic partially drained behaviour was different from that expected in the drained or undrained conditions. ... There is no evidence of pore pressure building up in any of the events conducted in the nine tests.

27 Jun 2002: A series of 8 calibration chamber tests is reported. The pattern of soil displacement during pile installation was measured. ... Four series of field tests using pressed-in piles were conducted. The first series demonstrated that internal shaft friction

16 Apr 2002: Eight tests were carried out on laterally spreading slopes and a further five on slopes containing instrumented pile foundations. ... Using linearised pore pressures overestimated the measured slope displacements as dilation limits the movements measured

11 Dec 2002: During loading, tests conducted at different rates showed no influence on the strain developed. ... In unloading, the slower rate tests produced greater shear strains once the condition became extensive.

7 Mar 2002: Environmental Geotechnics. 29. M.C Barbosa, R J Lynch,. and J.D McKinley, "Migration of aqueous acetone and potassium chloride through kaolin: minidrum centrifuge test CBLC1", Cambridge University Engineering Department Technical ... imaging techniques

14 Mar 2002: A discrete element package PFC3D is then used to model individual particles in simple crushing tests.

16 Apr 2002: effects. A series of centrifuge tests involving loose and dense, dry and saturated models of homogeneous horizontal sand layers has been carried out to investigate the effects of the end-walls

21 Jan 2002: A summary of allthe test results and analytical predictions is given in Table 1. ... The test results for the overall stiffness of thehinge in each component direction can be seen in Figure 7.

27 Aug 2002: 2.5. 3. 3.5. 4. 4.5. FE simulation. Displacement (mm). For. ce (. N). Test 1. Test 2. Figure 8: Comparison of two tests on Config-uration A dish with ... Test 2. Figure 9: Comparison of two tests on Config-uration B dish with FE analysis.

18 Feb 2002: Theexperimental results presented in this reference are avery valuable benchmark against which to test new so-lutions. ... Comparison with Sewall’s Experiment. The third test case was based on one of the tests re-ported in Ref.

17 Oct 2002: in a style suited to the analysis of geotechnical tests. This technical report explains. ... accurate and precise deformation data from a geotechnical test. As noted earlier, the.

9 Sep 2002: Enlightened modellers may seek to cross-correlate modelling parame-ters with index test values in order to maximise the use of this plentiful empirical information. ... This is not the case, however. Two factors of uncertain origin emerge from test data.